Hobart Ironman 230 vs Miller 252 - Which One Should You Get

Hobart Ironman 230 vs Miller 252 – Which One Should You Get

by

There are different welding machines that are available right now. Let us put the focus on two welding machines that are often compared to each other – Hobart Ironman 230 and Miller 252. These are machines that are great for welding but which one will you choose if you need to make a decision?

Hobart Ironman 230

Hobart Ironman 230

This is the welding machine that is being used more for MIG welding and flux-colored welding. This is the type of welder that you need if you know that you need to weld thick and tough materials.

One of the things that you will appreciate about this is that this is a full-size welder. It can be easily moved around because it has rollers. Just imagine how convenient this will be for you especially since it can get quite heavy. The fact that it can also be rolled will make it easier to store in the right place. If you would like to have a full-sized welder but will be able to do light-duty work, this can be your main choice. It comes with a lot of benefits too.

Pros
  • This is a welding machine that is easy to set up.
  • Welding with the use of this machine will not be too hard to do.
  • Comes with great arc quality
  • This is a powerful welder with 30 to 250-output amperage.
  • The spool hub of this particular welder is unique so you know that changing the wire spools and the wire alignment will not be too hard to do.
  • This comes with reversible driver roll which means that you do not have to worry about getting spare parts and also getting some wire spools.
Cons
  • The wire can sometimes get clogged but if you would turn the machine on and off, it might solve the issue.
  • This would need a special setup if you plan to do it at home. You cannot just plug it in and expect it to work.
  • The price of this welder is more expensive as compared to the other MIG welders that you will see.

Millermatic 252 MIG Welder

Millermatic 252 MIG Welder

People who have been welding for a long time may be familiar with Miller 252. This machine is very versatile so you know that it will be able to weld properly even when you need to use a higher output for a longer time. This is the type of welding machine that is being used more for industrial work.

This comes with an EZ-Change Low Cylinder Rack which means that you can easily change the bottles when you roll them on and off the rack. There are available instructions that you can follow so that you can do this easily. The 15ft gun range also has a reach of about 15 feet which means that you can work on different materials easier without having to change your equipment.

This is also a welding machine that you can use when you need to weld thicker and stronger materials. This is amazing for heavy-duty work which means that if you are a professional, this may be what you deserve.

Pros
  • This is compatible with different spool guns. You can also control the wire feed controls. This means that you do not have to make trips back and forth to the welder.
  • This comes with a flip-down compartment that can store the different items that you may have.
  • There is a chart available that you can refer to if in case you get confused with the progress that you have made with your current project.
  • The output amperage can be very effective especially when you are welding thick materials.
  • The design of this welder is great and it is definitely one of the things that you may like about this when you try it out for the first time
Cons
  • This is not to be used by hobbyists.
  • Some people say that they usually have a hard time understanding how this machine can be used properly.
  • This is very expensive.
  • The ground and clump are not very effective and you may need to get new ones from time to time.

Which one is best between Hobart Ironman 230 vs Miller 252?

It is already obvious that these two machines are somewhat similar which explains why there may often be compared to each other. You are recommended to use Hobart Ironman 230 when you are searching for something that you can use at home. Just remember that you need to change the setup a bit so that it will be accommodated by your current electric supply.

You can use Miller 252 instead when you need to create more heavy-duty projects usually for companies or large industries. This is known to be a reliable machine that you can use to create different welds especially in a short amount of time.

Any of the two machines will cost a lot of money. It will all come down to how you are going to use the machine so that you can make the best choice. These machines come with the capabilities that you will need to complete the different tasks that you may have.

Conclusion

You have learned enough details about these two machines so it may be easier for you to choose which one you would like to get. They can be used for the different tasks that you are planning to do. Trying to decide which one you would pick will not be a challenge anymore when you get to know both machines better. Any of the two choices can be great. While they may be more expensive as compared to other welding machines, you can be assured that they can help you create quality welds for different types of materials that you are planning to weld together.

Leave a Comment